For better thermal insulation of the hot and cold side of a thermoelectric system you increase the distance by incorporating a spacer between Peltier module and to be cooled object.

Especially in the arrangement of a plurality of Peltier modules in a group is the most accurate thickness and parallelism of these spacers crucial for the overall efficiency of the entire system - our spacers are delivered with guaranteed absolute thickness tolerance of ±50µm and a plane parallelism of up to ±10µm.

Material: Aluminium (AlCuMgPb)

These spacer blocks are custom manufactured because the thickness depends in combination with the special Peltier module on the desired insulation thickness.

Example: 40 x 45 x 14,5 mm

 Data sheet

perfectly fits for 1 Peltier module up to size 40 x 40 mm
2 mounting holes M3 with 50 mm center distance
Connection bores with internal thread RP 1/8"
on one side a mounting platform 40 x 40 x 5 mm is formed
Material: Aluminium EN AW-6101
best anodization on the surfaces coming into contact with the cooling liquid

 Data sheet

perfectly fits for 1 Peltier module up to size 40 x 40 mm
3 mounting holes M5 with 50 mm center distance
Connection bores with internal thread RP 1/8"
on one side a mounting platform 40 x 90 x 5 mm is formed
Material: Aluminium EN AW-6101
best anodization on the surfaces coming into contact with the cooling liquid

 Data sheet

made completely of copper
with 2 mounting holes with or without thread
1" long connecting pipes with outer diameter 0,25"
with bore 19mm xd = 1,58mm for temperature sensor

 Data sheet

High-performance heatsinks with brazed cooling fins
very high thermal conductivity up to 0,07 K/W!
Dimensions from 51 x 51 x 32 to 102 x 203 x 32 mm
with bore 19mm xd = 1,58mm for temperature sensor