Data sheet

The following groups of the series SG-531 and series SG-615 will be obsolete by the end of 2019:
SG-531PTJ
SG-531PTW
SG-531PTG
SG-615PTJ
SG-615PTW
SG-615PTG
SG-615PCN

To shorten delivery times for oscillators with transmission frequencies, we offer the series SG-8002 and SG-8003 from EPSON: a programmable generation of PLL oscillators with integrated Quartz.

Because of the internal PLL-circuit, output frequencies of 1-125 MHz in the SG-8002 and 1-166 MHz in the SG-8003 can be generated.

With our programming devices we are able to produce in a very short time - in emergencies on the same day - quartz oscillators in various housing types, CMOS or TTL compatible, SG-8002 5,0 or 3,3V with tristate or Enable / Disable function with the desired frequencies - and the SG-8003 from 1,8 - 3,3V!

ATTENTION: Due to the use of the PLL-technology it can by the jitter (see table below on the data sheets.) which cause problems with video and telecom applications as well as signal processors at the output; for some applications is a conventional quartz oscillator indispensable. Also the use in PLL circuits is not recommended.

 Data sheet

Dimensions SG-8002JF: 4,6 x 7,1 x 1,5 mm, Plastic
Dimensions SG-8002CA: 5,0 x 7,0 x 1,4 mm, Ceramic base/Metal lid
Frequency range: 1 MHz - 125 MHz
Supply voltage: 3,3 / 5,0V
Output: enable or standby
Frequency stability tolerances: ±100 / ±50ppm
Operating temperature range: -20/+70°C and -40/+85°C

Attention: The type SG8002JF (plastic housing) was set by Epson to "not recommended for new designs". Please therefore for new applications, use the very similar type SG8002CA (ceramic / metal housing), or if possible even existing applications could be already changed.

 Data sheet

Dimensions: 2,5 x 3,2 x 1,05 mm
Ceramic base/Metal lid
Frequency range: 1 MHz - 125 MHz
Supply voltage: 3,3 / 5,0V
Output: enable or standby
Frequency stability tolerances: ±100 / ±50ppm
Operating temperature range: -20/+70°C and -40/+85°C

 Data sheet

Dimensions SG-8002JC: 5,0 x 10,5 x 2,7 mm, Plastic
Dimensions SG-8002JA: 8,7 x 14,0 x 4,7 mm, Plastic
Frequency range: 1 MHz - 125 MHz
Supply voltage: 3,3 / 5,0V
Output: enable or standby
Frequency stability tolerances: ±100 / ±50ppm
Operating temperature range: -20/+70°C and -40/+85°C

 Data sheet

Dimensions SG-8002DC: 6,6 x 13,7 x 5,1 mm compatible with DIL-8-oscillators
Dimensions SG-8002DB: 6,4 x 19,8 x 5,1 mm compatible with DIL-14-oscillators
Frequency range: 1 MHz - 125 MHz
Supply voltage: 3,3 / 5,0V
Output: enable or standby
Frequency stability tolerances: ±100 / ±50ppm
Operating temperature range: -20/+70°C and -40/+85°C

 Data sheet

Dimensions: 2,6 x 3,3 x 1,15 mm, Plastic
Frequency range: 1 MHz - 125 MHz
Supply voltage: 3,3 / 5,0V
Output: enable or standby
Frequency stability tolerances: ±100 / ±50ppm
Operating temperature range: -20/+70°C and -40/+85°C

Not recommended for new designs, remainders are still available.
Recommended Replacement Type: SG-8002CE

 Data sheet

The series SG-8002LB will be obsolete by the end of 2019. The last time Buy is Dezember 2019 and the last delivery in June 2020.

Please use the Type SG-8018CB and the Type SG-8101CB instead.

Dimensions: 2,8 x 5,0 x 1,2 mm, Plastic
Frequency range: 1 MHz - 125 MHz
Supply voltage: 3,3 / 5,0V
Output: enable or standby
Frequency stability tolerances: ±100 / ±50ppm
Operating temperature range: -20/+70°C and -40/+85°C

 Data sheet

The series SG-8003 will be obsolete by the end of 2019. The last time Buy is Dezember 2019 and the last delivery in June 2020.

Please use the Type SG-8018 and the Type SG-8101 instead.

Frequency range: 1 MHz - 166 MHz
Supply voltage: 1,8 / 2,5 / 3,0 / 3,3V
Output: enable or standby
Frequency stability tolerances: ±100 / ±50ppm
Operating temperature range: -20/+70°C and -40/+85°C

 Data sheet

Dimensions SG-8018CA: 5,0 x 7,0 x 1,3 mm, Ceramic base/Metal lid
Frequency range: 0,67 MHz - 170 MHz
Supply voltage: 1,62 / 3,63V
Output: enable or standby
Frequency stability tolerances: ±50ppm
Operating temperature range: -40/+105°C

 Data sheet

Dimensions SG-8018CB: 3,2 x 5,0 x 1,1 mm, Ceramic base/Metal lid
Frequency range: 0,67 MHz - 170 MHz
Supply voltage: 1,62 / 3,63V
Output: enable or standby
Frequency stability tolerances: ±50ppm
Operating temperature range: -40/+105°C

 Data sheet

Dimensions SG-8018CE: 3,2 x 2,5 x 1,05 mm, Ceramic base/Metal lid
Frequency range: 0,67 MHz - 170 MHz
Supply voltage: 1,62 / 3,63V
Output: enable or standby
Frequency stability tolerances: ±50ppm
Operating temperature range: -40/+105°C

 Data sheet

Dimensions SG-8018CG: 2,0 x 2,5 x 0,7 mm, Ceramic base/Metal lid
Frequency range: 0,67 MHz - 170 MHz
Supply voltage: 1,62 / 3,63V
Output: enable or standby
Frequency stability tolerances: ±50ppm
Operating temperature range: -40/+105°C

 Data sheet

Dimensions SG-8101CA: 5,0 x 7,0 x 1,3 mm, Ceramic base/Metal lid
Dimensions SG-8101CB: 3,2 x 5,0 x 1,1 mm, Ceramic base/Metal lid
Dimensions SG-8101CE: 2,5 x 3,2 x 1,0 mm, Ceramic base/Metal lid
Dimensions SG-8101CG: 2,0 x 2,5 x 0,7 mm, Ceramic base/Metal lid
Frequency range: 0,67 MHz - 170 MHz
Supply voltage: 1,62 / 3,63V
Output: enable or standby
Frequency stability tolerances: ±15ppm at -40/+85°C and ±20ppm at -40/+105°C
Operating temperature range: -40/+105°C