Willkommen bei Knap Industrieelektronik

Sections

Personal tools

You are here: Home » Products » Connectors » D-Sub Connector » D-Sub with machined precision contacts » straight

straight

Up one level

in stock

on order, occasionally in stock

sales item, stock only

discontinued, not for new designs

Series general technical informations
	All types are available in tinned or chromated shell (housing) in quality class 1 (500 cycles) and 2 (200 cycles, standard) available RoHS-compliant Link to general technical datas for Standard- and IDC-Connectors
Series D-Sub with solder cup
	Data sheet machined contacts with solder cups plug or socket connector number of poles: 9, 15, 25, 37, 50 suitable for cable AWG 18 Following assemblies are available:
Series HD-D-Sub with solder cups
	Data sheet machined contacts with solder cups plug or socket connector number of poles: 15, 26, 44, 62, 78 Link to assemblies (only rivet nut M85x/M85xx reasonable)
Series D-Sub with solder pin
	Data sheet machined contacts with solder pins plug or socket connector number of poles: 9, 15, 25, 37, 50 suitable for cable AWG 18 Link to assemblies Link to hole pattern
Series HD-D-Sub straight with solder pins
	Data sheet machined contacts with solder pins plug or socket connector number of poles: 15, 26, 44, 62, 78 Link to assemblies Link to hole pattern
Series Y-1.6PCB D-Sub for edges assembling
	Data sheet machined contacts with crooked solder pins plug or socket connector number of poles: 9, 15, 25, 37 suitable for side assembling on 1,6mm PCB: PCB edge is moved between the solder pin rows and soldered with the D-Sub on the cranks recommended assemblies: M85x and M85xx
Series D-Sub with Wire-Wrap-Contacts
	Data sheet machined contacts with wire wrap pins plug or socket connector number of poles: 9, 15, 25, 37 and 50 wrap-pin-length: 13,4 mm
Series D-Sub with Crimp contacts
	Data sheet Housing for crimp contacts machined or stamped contacts for cable AWG28-20 plug or socket connector number of poles: 9, 15, 25, 37 and 50
Series PEW-8.7 Four-mandrel crimping tool
	Data sheet Special hand crimping tool for crimping of turned male and female contacts for cross-sections 0,08-2,5 mm² 12-piece contact (locator) for different contacts Crimp cross section adjustment via 4-stage adjustment eccentric Crimp pressure set by factory, adjustable with supplied test pin uniform indent crimping by synchronously driving the crimping dies Forced locking for reliable crimping, unlockable Force is amplified by optimal leverage handy design, low weight Chrome plated body, ergonomically designed two-component handles promptly available For our twisted D-Sub signal contacts Settings SX2/x: Excenter B Locator 2 PX2/x: Excenter B Locator 1 SX1/x: Excenter C Locator 2 PX1/x: Excenter C Locator 1

For additional information please contact us.

Document Actions

This site conforms to the following standards: